en-us	Adjust HUD Properties
pt	Ajustar Visor Holográfico

en-us	Adjust LOD Ranges
pt	Ajustar Nível de Detalhes

en-us	AI
pt	IA

en-us	AI Objects

en-us	Aircraft Center (Experimental)

en-us	Aircraft Checklists
pt	???

en-us	Aircraft Help
pt	Ajuda da Aeronave

en-us	ALS Filter Effects

en-us	ATC Services in Range
pt	Serviços CTA ao Alcance

en-us	Autopilot
pt	Piloto Automático

en-us	Autopilot Settings
pt	Configurações do Piloto Automático

en-us	Autostart
pt	Ligar Automático

en-us	Basic Simulator Keys
pt	Teclas Básicas do Simulador

en-us	Carrier Controls
pt	Controles do Porta-Aviões

en-us	Cockpit View Options
pt	Opcões da Visão da Cabine

en-us	Common Aircraft Keys
pt	Teclas Comuns dos Aviões

en-us	Configure Development Extensions
pt	Configurar Extensões de Desenvolvimento

en-us	Cycle GUI Style

en-us	Debug
pt	Depuração

en-us	Development Keys
pt	Teclas de Desenvolvimento

en-us	Display Tutorial Marker
pt	Exibir Marcador do Tutorial

en-us	Documentation Browser
pt	Navegador de Documentação

en-us	Dump Scene Graph
pt	Esvaziar Cena Gráfica

en-us	Earthview Orbital Rendering

en-us	Environment
pt	Ambiente

en-us	Environment Settings
pt	Configurações de Ambiente

en-us	Equipment
pt	Equipamento

en-us	View Errors

en-us	Quit
pt	Sair

en-us	--- Failures ---
pt	--- Panes ---

en-us	FG1000 MFD

en-us	FG1000 PFD

en-us	FGCom Settings

en-us	File
pt	Arquivo

en-us	Flight Recorder Control

en-us	Fuel and Payload
pt	Combustível e Carga

en-us	Weather
pt	Clima

en-us	Select Airport
pt	Selecionar Aeroporto

en-us	GPS Settings
pt	Configurações do GPS

en-us	Help
pt	Ajuda

en-us	Help (opens in browser)
pt	Ajuda (Abre no navegador)

en-us	Highlighting

en-us	Immatriculation
pt	Matrícula

en-us	Input Devices

en-us	Instrument Failures
pt	Panes de Instrumentos

en-us	Instrument Settings
pt	Configurações de Instrumentos

en-us	Jetway Settings
pt	Configurações da Ponte de Embarque

en-us	Joystick Configuration
pt	Configuração de Joystick

en-us	Joystick Information
pt	Informação do Joystick

en-us	Lag Settings

en-us	Light Switches

en-us	Load Flight Recorder Tape
pt	Carregar Fita do Gravador de Voo

en-us	Local Weather (Test)
pt	Clima Local (Teste)

en-us	Location
pt	Localização

en-us	Logging
pt	Relatórios de Log

en-us	Map
pt	Mapa

en-us	Map (opens in browser)

en-us	Map (Canvas)

en-us	About
pt	Sobre

en-us	Mouse Configuration

en-us	MPCarrier Selection
pt	Seleção de Porta-Aviões Multijogador

en-us	Chat Dialog
pt	Janela de Chat

en-us	Chat Menu
pt	Menu de Chat

en-us	Pilot List
pt	Lista de Pilotos

en-us	Multiplayer Settings
pt	Configurações de Multijogador

en-us	Multiplayer
pt	Multijogador

en-us	Nasal Console
pt	Console Nasal

en-us	Nasal REPL Interpreter

en-us	Next Waypoint
pt	Próximo Destino

en-us	Monitor System Performance
pt	Monitorar Performance do Sistema

en-us	Adjust View Position
pt	Ajustar Distância da Visão

en-us	Position Aircraft In Air
pt	Posicionar Aviao no Ar

en-us	Previous Waypoint
pt	Destino Anterior

en-us	Print Rendering Statistics
pt	Imprimir Estatísticas de Renderização

en-us	Print Visible Scene Info
pt	Imprimir Info da Cena Visível

en-us	Browse Internal Properties
pt	Propriedades Internas

en-us	Pushback
pt	Trator pushback

en-us	Radio Settings
pt	Configurações do Radio

en-us	Random Attitude
pt	Altitude Aleatória

en-us	Random Failures
pt	Panes Aleatórias

en-us	Reload Autopilot
pt	Recarregar Piloto Automático

en-us	Reload GUI
pt	Recarregar Interface Gráfica

en-us	Reload HUD
pt	Recarregar HUD (Visor Holográfico)

en-us	Reload Input
pt	Recarregar Entrada

en-us	Reload Materials
pt	Recarregar Materiais

en-us	Reload Aircraft Model
pt	Recarregar Modelo da Aeronave

en-us	Reload Network
pt	Recarregar Rede

en-us	Reload Panel
pt	Recarregar Painel

en-us	Reload Scenery
pt	Recarregar Cenário

en-us	Select Rendering Buffers
pt	Selecionar Buffers de Renderização

en-us	Hide/Show Rendering Buffers
pt	Exibir Buffers de Renderização

en-us	Rendering Options
pt	Opções de Renderização

en-us	Instant Replay
pt	Replay do Voo

en-us	Reset
pt	Resetar

en-us	Route Manager
pt	Gerenciador de Rota

en-us	Save Flight Recorder Tape
pt	Salvar Fita do Gravador de Voo

en-us	Traffic and Scenario Settings
pt	Configurações de Tráfego e Cenário

en-us	Scenery Sources

en-us	Select Livery
pt	Selecionar pintura

en-us	Show/hide yokes
pt	Exibir/esconder manche

en-us	Screenshot
pt	Capturar Tela

en-us	Screenshot Directory
pt	Diretório da Captura de Tela

en-us	Sound Configuration
pt	Configuração do Som

en-us	Cycle On-Screen Statistics
pt	Alternar Estatísticas na Tela

en-us	Stereoscopic View Options
pt	Opcoes da Visão Estereoscópica

en-us	Stopwatch
pt	Cronômetro

en-us	Swift Connection

en-us	System Failures
pt	Panes do Sistema

en-us	Tanker Controls
pt	Controles do Avião-Tanque

en-us	Scenery Download
pt	Download de Cenário

en-us	Tiller Steering
pt	Direção do Leme

en-us	Time Mode

en-us	Time Settings
pt	Configurações de Hora

en-us	Toggle Fullscreen
pt	Tela Cheia

en-us	Toggle Glide Slope Tunnel
pt	Exibir Túnel do GlideSlope

en-us	Tower Position
pt	Posição da Torre

en-us	Tutorials
pt	Tutoriais

en-us	Video Control

en-us	Video Start

en-us	Video Stop

en-us	View
pt	Exibição

en-us	Add Clone View

en-us	Add Pair View

en-us	Add Pair Foreground View

en-us	View Options
pt	Opções das Visões

en-us	Push Pair View

en-us	Volcanoes

en-us	VR Options

en-us	Walker

en-us	Walker animation dialog

en-us	Select Equipment

en-us	Select Theme

en-us	Toggle Walker out/in

en-us	Wildfire Settings
pt	Configurações de Incêndios

en-us	Wingman Controls
pt	Controles de Voo em Formação

en-us	Save Video Configuration

en-us	Emit the Garmin AV400 protocol required to drive a Garmin 196/296 series GPS
pt	Emite o protocolo Garmin AV400 requerido para utilizar um GPS Garmin 196/296 series

en-us	Emit the set of AV400 strings required to drive a Garmin 400-series GPS from FlightGear
pt	Emite um conjunto de caracteres de texto AV400 requeridos para usar um GPS Garmin 400-series no FlightGear

en-us	Open connection for "A" channel using Garmin WAAS GPS protocol

en-us	Open connection for "B" channel using Garmin WAAS GPS protocol

en-us	Specify a path to addon;

en-us	Set the ADF1 radio frequency, optionally preceded by a card rotation.
pt	Define a frequencia de radio ADF1, opcionalmente precedido por uma rotacao de carta.

en-us	Set the ADF2 radio frequency, optionally preceded by a card rotation.
pt	Define a frequencia de radio ADF2, opcionalmente precedido por uma rotacao de carta.

en-us	Select aircraft aerodynamics model to load
pt	Seleciona o modelo da aerodinamica da aeronave para carregar

en-us	Enable/Disable AI subsystem (required for multi-player, AI traffic and many other animations.) Disabling it is deprecated.

en-us	Add and enable a new scenario. Multiple options are allowed.
pt	Adiciona e habilita um novo cenario. Multiplas opcoes sao permitidas.

en-us	Enable/Disable artificial traffic.

en-us	Select an aircraft profile as defined by a top level <name>-set.xml
pt	Selecionar um perfil de aeronave definido por um <nome>-set.xml de nivel superior

en-us	Specify the exact directory to use for the aircraft (normally not required, but may be useful). Interpreted relatively to the current directory. Causes the <path-cache> from autosave_X_Y.xml, as well as --fg-aircraft and the FG_AIRCRAFT environment variable to be bypassed.
pt	Diretorio das aeronaves relativo ao caminho do executavel

en-us	Aircraft
pt	Aeronave

en-us	Specify starting position relative to an airport
pt	Especifica a posicao inicial relativa ao aeroporto

en-us	Enable/Disable security flag. Enable means that network connections will be allowed full access to the simulator including running arbitrary scripts. Ensure you have adequate security (such as a firewall which blocks external connections).

en-us	Allow Nasal scripts to read files from directories listed as path (separate multiple paths with a semicolon (Windows) or a colon (UNIX)). By default, for security reasons, Nasal scripts can only read data from certain directories, such as $FG_ROOT, $FG_HOME, etc.

en-us	Starting altitude
pt	Altitude inicial

en-us	Enable/Disable anti-aliased HUD

en-us	Specify a multiplier for the aspect ratio.
pt	Especificar um multiplicador para a taxa de proporcao.

en-us	Open connection using the ATC sim protocol (atc610x)
pt	Abrir conexao usando o protocolo ATC sim(atc610x)

en-us	Open connection using the Atlas protocol
pt	Abrir conexao usando o protocolo Atlas

en-us	Audio Options
pt	Opcoes de Audio

en-us	Enable/Disable auto coordination

en-us	Avionics Options
pt	Opciones dos Avionicos

en-us	Specify the bits per pixel
pt	Especifica os bits por pixel

en-us	Specify path to your web browser
pt	Especifica o caminho do navegador web

en-us	Assign a unique name to a player
pt	Atribui um nome unico para um jogador

en-us	Specify starting position on an AI carrier
pt	Especifica a posicao inicial em um porta-avioes IA

en-us	Specify a starting position relative to the carrier where you can use the predefined abeam (start on downwind abeam) or FLOLS (start on final approach) values, or specify the name of the carrier's parking position. Must also specify a carrier.

en-us	Create an overcast ceiling, optionally with a specific thickness (defaults to 2000 ft).
pt	Criar um teto nublado, opcionalmente, com uma espessura especifica (o padrao e 2000 pes).

en-us	Enable/Disable clock freeze

en-us	Enable/Disable 2D (flat) cloud layers

en-us	Enable/Disable 3D (volumetric) cloud layers

en-us	Set the COM1 radio frequency
pt	Define a frequencia de radio COM1

en-us	Set the COM2 radio frequency
pt	Define a frequencia de radio COM2

en-us	Enable/Disable CompositeViewer (extra view windows)

en-us	Specify the path to XML file for multi-pass rendering. The path is relative to $FG_ROOT (defaults to Compositor/default.xml).

en-us	Load additional properties from path
pt	Carrega propriedades adicionais do caminho

en-us	Enable/Disable displaying console (Windows specific)

en-us	Specify an additional base data directory (FGData), before the $FG_ROOT directory

en-us	Debugging Options
pt	Opcoes de Depuracao

en-us	Enable/Disable developer mode

en-us	Deprecated option (disable internal AI subsystem)
pt	Opcao em desuso (desativa o sistema de trafego interativo)

en-us	Disable artificial traffic.
pt	Desativar trafego artificial.

en-us	Disable anti-aliased HUD
pt	Desativa o visor holografico (HUD) com anti-serrilhado

en-us	Disable auto coordination
pt	Desativa a auto-coordenacao

en-us	Clock advances normally
pt	Relogio avanca normalmente

en-us	Disable 2D (flat) cloud layers
pt	Desativar as camadas de nuvens 2D (planas)

en-us	Disable 3D (volumetric) cloud layers
pt	Desativar as camadas de nuvens 3D (volumetricas)

en-us	Disable runway light distance attenuation
pt	Desativa a atenuacao da distancia das luzes da pista

en-us	Disable enhanced runway lighting
pt	Desativa a iluminacao melhorada das pistas

en-us	Disable FGCom built-in

en-us	Start in a running state
pt	Comece em um estado de funcionamento

en-us	Fuel is consumed normally
pt	O combustivel e consumido normalmente

en-us	Disable fullscreen mode
pt	Desativa o modo tela cheia

en-us	Enable headless mode

en-us	Disable the move to hold short position for multiplayer

en-us	Disable celestial body growth illusion near the horizon
pt	Desativa a ilusao do crescimento de corpos celestes perto do horizonte

en-us	Disable 3D HUD
pt	Desativa o visor holografico (HUD) 3D

en-us	Disable Heads Up Display (HUD)
pt	Desativa visor holografico (HUD)

en-us	Disable extra mouse pointer
pt	Desativar ponteiro adicional do mouse

en-us	Disable instrument panel
pt	Desativa o painel de instrumentos

en-us	Exclude random buildings objects
pt	Excluir edificios aleatorios

en-us	Exclude random scenery objects
pt	Excluir objetos aleatorios do cenario

en-us	Exclude random vegetation objects
pt	Excluir objetos aleatorios de vegetacao

en-us	Disable METAR based real weather fetching
pt	Desativar a busca de clima real baseada em METAR

en-us	Don't save preferences upon program exit
pt	Nao salvar preferencias ao sair do programa

en-us	Disable crash and error reports from being sent to the development team for analysis

en-us	Disable sound effects
pt	Desativa efeitos sonoros

en-us	Disable specular reflections on textured objects
pt	Desativa a reflexao especular sobre objetos texturizados

en-us	Disable splash screen
pt	Desativa tela de abertura

en-us	Disable automatic scenery downloads/updates
pt	Desativa o download/atualizacao automatica de cenarios

en-us	Disable texture cache (DDS)

en-us	Disable textures
pt	Desativa as texturas

en-us	Disable VR

en-us	Disable wireframe drawing mode
pt	Desativa o modo de desenho aramado

en-us	Enable/Disable runway light distance attenuation

en-us	Slave the DME to one of the NAV radios, or set its internal frequency.
pt	Define como escravo o DME para uma das radios NAV, ou define sua frequencia interna.

en-us	Base directory to use for aircraft and scenery downloads (the TerraSync scenery directory may be specifically set with --terrasync-dir)

en-us	Enable AI subsystem (required for multi-player, AI traffic and many other animations)
pt	Ativar trafego interativo (necessario para multi-jogador, trafego IA e muitas outras animacoes)

en-us	Enable artificial traffic.
pt	Ativar trafego artificial.

en-us	Enable anti-aliased HUD
pt	Ativa o visor holografico (HUD) com anti-serrilhado

en-us	Enable auto coordination
pt	Ativa a auto-coordenacao

en-us	Do not advance clock
pt	Nao avanca o relogio

en-us	Enable 2D (flat) cloud layers
pt	Ativar as camadas de nuvens 2D (planas)

en-us	Enable 3D (volumetric) cloud layers
pt	Ativar as camadas de nuvens 3D (volumetricas)

en-us	Enable runway light distance attenuation
pt	Ativa a atenuacao da distancia das luzes da pista

en-us	Enable enhanced runway lighting
pt	Ativa a iluminacao melhorada das pistas

en-us	Enable FGCom built-in

en-us	Start in a frozen state
pt	Comece em um estado congelado

en-us	Fuel tank quantity forced to remain constant
pt	Quantidade do tanque de combustivel forcada a permanecer constante

en-us	Enable fullscreen mode
pt	Ativa o modo tela cheia

en-us	Enable celestial body growth illusion near the horizon
pt	Ativa a ilusao do crescimento de corpos celestes perto do horizonte

en-us	Enable 3D HUD
pt	Ativa o visor holografico (HUD) 3D

en-us	Enable Heads Up Display (HUD)
pt	Ativa visor holografico (HUD)

en-us	Enable extra mouse pointer
pt	Ativar ponteiro adicional do mouse

en-us	(i.e. for full screen Voodoo based cards)
pt	(i.e. para placas do tipo Voodoo tela cheia)

en-us	Enable instrument panel
pt	Ativa o painel de instrumentos

en-us	Include random buildings objects
pt	Adicionar edificios aleatorios

en-us	Include random scenery objects
pt	Adicionar objetos aleatorios do cenario

en-us	Include random vegetation objects
pt	Adicionar objetos aleatorios de vegetacao

en-us	Enable METAR based real weather fetching (this requires an open internet connection)
pt	Ativar a busca de clima real baseada em METAR (isto requer uma conexao a Internet)

en-us	Allow saving preferences at program exit
pt	Permitir salvar preferencias ao sair do programa

en-us	Enable crash and error reports to be sent to the development team for analysis

en-us	Enable sound effects
pt	Ativa efeitos sonoros

en-us	Enable specular reflections on textured objects
pt	Ativa a reflexao especular sobre objetos texturizados

en-us	Enable splash screen
pt	Ativa tela de abertura

en-us	Enable automatic scenery downloads/updates
pt	Ativa o download/atualizacao automatica de cenarios

en-us	Enable texture cache (DDS)

en-us	Enable textures
pt	Ativa as texturas

en-us	Enable VR

en-us	Enable wireframe drawing mode
pt	Ativa o modo de desenho aramado

en-us	Environment Options
pt	Opcoes de ambiente

en-us	Fail the pitot, static, vacuum, or electrical system (repeat the option for multiple system failures).
pt	Falhar o sistema de pitot, vacuo, estatico, ou sistema eletrico (repetir a opcao para multiplas falhas do sistema).

en-us	Select the core flight dynamics model
pt	Seleciona o nucleo dos modelos de dinamica de voo

en-us	Can be one of jsb, larcsim, yasim, magic, balloon, ada, external, or null
pt	Pode ser: jsb, larcsim, yasim, magic, balloon, ada, external, ou nulo

en-us	Flight Model
pt	Modelo de Voo

en-us	Features
pt	Caracteristicas

en-us	Specify additional aircraft directory path(s) (alternatively, you can use --aircraft-dir to target a specific aircraft in a given directory)
pt	Especifica o caminho do diretorio de aeronaves adicionais

en-us	Specify the root data path
pt	Especifica a pasta de dados raiz

en-us	Specify the scenery path(s);
pt	Especifica o caminho da pasta de cenario(s);

en-us	Defaults to $FG_ROOT/Scenery
pt	Por padrao e $FG_ROOT/Scenery

en-us	Enable/Disable FGCom built-in

en-us	Use a model viewer rather than load the entire simulator
pt	Utilizar um visualizador do modelo, em vez de carregar o simulador inteiro;

en-us	Specify starting position relative to a fix
pt	Especifica a posicao inicial relativa a um fixo

en-us	Open connection using the Flarm protocol, which includes NMEA/GPS and traffic reporting messages

en-us	Read all waypoints from a file
pt	Ler todos os waypoints de um arquivo

en-us	Disable fog/haze
pt	Desativa nevoeiro/neblina

en-us	Enable fastest fog/haze
pt	Ativar rapido nevoeiro/neblina

en-us	Enable nicest fog/haze
pt	Ativar o melhor nevoeiro/neblina

en-us	Specify field of view angle
pt	Especifica o campo do angulo de visao

en-us	Enable/Disable aborting on encountering a floating point exception
pt	Abortar ao encontrar uma excecao de ponto flutuante;

en-us	Enable/Disable start in a frozen state

en-us	Enable/Disable fuel consumption freeze

en-us	Enable/Disable fullscreen mode

en-us	Open connection using the Garmin GPS protocol
pt	Abrir conexao usando o protocolo Garmin GPS

en-us	General Options
pt	Opcoes Gerais

en-us	Open connection using a predefined communication interface and a preselected communication protocol
pt	Abrir conexao usando uma interface predefinida de comunicacao e um protocolo pre selecionado de comunicacao

en-us	Specify window geometry (640x480, etc)
pt	Especifica a geometria das janelas (640x480, etc)

en-us	Specify flight path angle (can be positive)
pt	Especifica o angulo da trajetoria de voo (pode ser positivo)

en-us	GMT

en-us	Set graphic options from one of the presets

en-us	Enable/Disable GUI (disabling GUI enables headless mode)

en-us	Specify heading (yaw) angle (Psi)
pt	Especifica o angulo da direcao (rota) (Psi)

en-us	Show the most relevant command line options
pt	Exibe as opcoes mais relevantes da linha de comando

en-us	Enable/Disable the move to hold short position for multiplayer

en-us	Enable/Disable celestial body growth illusion near the horizon

en-us	Enable http server on the specified address. Specify the port or address:port to bind to.
pt	Ativa o servidor http na porta especificada

en-us	Enable/Disable 3D HUD

en-us	Hud displays percentage of triangles culled
pt	HUD exibe uma porcentagem dos triangulos perdidos

en-us	Enable/Disable Heads Up Display (HUD)

en-us	Hud Options
pt	Opcoes do HUD

en-us	Hud displays number of triangles rendered
pt	HUD exibe o numero de triangulos renderizados

en-us	Open connection using the International Gliding Commission protocol

en-us	Enable/Disable ignoring the autosave file, i.e. the settings saved in this file will not be loaded during startup, nor will the settings be saved to this file when closing the simulator

en-us	Enable/Disable starting in air (implied when using --altitude)
pt	iniciar no ar (implicado a usar --altitude)

en-us	IO Options
pt	Opcoes ES

en-us	Open connection to an Agwagon joystick
pt	Abrir conexao para um joystick Agwagon

en-us	Enable screen shot http server on the specified port (replaced by --httpd)
pt	Ativa captura de tela no servidor http na porta especificada (replaced by --httpd)

en-us	Log JSBSim properties in a CSV file. An output directives file contains an <output type="CSV"></output> element, within which should be specified the parameters or parameter groups that should be logged.

en-us	Open connection to a remote joystick
pt	Abrir conexao para um joystick remoto

en-us	Enable/Disable printing a report in JSON format on the standard output, giving information such as the FlightGear version, $FG_ROOT, $FG_HOME, aircraft and scenery paths, etc.

en-us	Select the language for this session
pt	Seleciona o idioma para esta sessao

en-us	Starting latitude (south = -)
pt	Latitude inicial (sul = -)

en-us	Enable/Disable GUI launcher

en-us	Select aircraft livery
pt	Seleciona a pintura da aeronave

en-us	Enable/Disable encode video while replaying tape specified by --load-tape

en-us	Load recording of earlier FlightGear session. For <name>, if <name> ends with .fgdata it is treated as the local path of the recording file; otherwise we form the local path by prepending <name> with the tape directory and appending ".fgtape". For <url> (starting with http:// or https://) we download the remote recording (which must be a Continuous recording) in the background to a url-dependent filename while replaying it; if the url-dependent filename already exists it is assumed to be a truncated download and we only download any remaining data.

en-us	Set fixed-dt mode while replaying tape specified by --load-tape

en-us	local aircraft time

en-us	Specify the detail levels, where levels are a space-separated numeric list of levels. The default is "1 3 5 7 9".

en-us	Specify the range multiplier (point from low to fine detail). Defaults is 2.

en-us	Specify the resolution of the terrain grid. Defaults is 1.

en-us	Specify the method of texturing the terrain. The default is bluemarble.

en-us	Specify which logging class(es) to use
pt	Especifica que classe(s) de registro de log utilizar

en-us	Log to directory DIR. The special value 'desktop' causes logging to the desktop (OS-dependent location). This option may be given several times, using a different value each time. Inside the specified directory, the written log file is named FlightGear_YYYY-MM-DD_<num>.log, where <num> takes the values 0, 1, 2, etc.

en-us	Specify which logging level to use
pt	Especifica que nivel de registro de log utilizar

en-us	Starting longitude (west = -)
pt	Longitude inicial (oeste = -)

en-us	Specify initial mach number
pt	Especifica o numero MACH inicial

en-us	Specify the materials file used to render the scenery (default: Materials/regions/materials.xml)
pt	Especifica o arquivo de materiais utilizados para renderizar o cenario (por padrao: materials.xml)

en-us	Maximum frame rate in Hz.

en-us	Pass a METAR string to set up static weather (this implies --disable-real-weather-fetch)
pt	Passar um METAR para configurar clima estatico

en-us	Allows you to define a minimum status level (=development status) for all listed aircraft
pt	Permite definir um nivel minimo de status (=status de desenvolvimento) para todas as aeronaves listadas

en-us	Run the FDM this rate (iterations per second)
pt	Executar o MDV com esta taxa (interacoes por segundo)

en-us	Enable/Disable extra mouse pointer

en-us	(i.e. for full screen Voodoo based cards)

en-us	Specify multipilot communication settings;
pt	Especifica a configuracao das comunicacoes multipiloto

en-us	MultiPlayer Options
pt	Opcoes de Multijugador

en-us	multiple instances can be used

en-us	Open connection using the FG Native Controls protocol
pt	Abrir conexao usando o protocolo FG Native Controls

en-us	Open connection using the FG Native protocol
pt	Abrir conexao usando o protocolo FG Native

en-us	Open connection using the FG Native FDM protocol
pt	Abrir conexao usando o protocolo FG Native FDM

en-us	Open connection using the FG Native GUI protocol
pt	Abrir conexao usando o protocolo FG Native GUI

en-us	Set the NAV1 radio frequency, optionally preceded by a radial.
pt	Define a frequencia de radio NAV1, opcionalmente precedida por um radial.

en-us	Set the NAV2 radio frequency, optionally preceded by a radial.
pt	Define a frequencia de radio NAV2, opcionalmente precedida por um radial.

en-us	Specify starting position relative to an NDB
pt	Especifica a posicao inicial relativa a um NDB

en-us	Specify the frequency of the NDB. Use with --ndb=ID

en-us	Network Options
pt	Opcoes de rede

en-us	Open connection using the NMEA protocol
pt	Abrir conexao usando o protocolo NMEA

en-us	Enable/Disable not loading any default configuration files (like .fgfsrc) unless explicitly specified with --config

en-us	Enable/Disable not attempting to trim the model
pt	NAO tentar compensar o modelo

en-us	(only with --fdm=jsbsim)
pt	(apenas com MDV=jsbsim)

en-us	Specify heading to reference point
pt	Especifica aa direcao para o pontode referencia

en-us	Specify distance to reference point (nautical miles)
pt	Especifica a distancia para um ponto de referencia (em milhas estatutarias)

en-us	Enable/Disable starting at ground level (default enabled)
pt	Iniciar no nivel do chao (padrao)

en-us	Open connection using the OpenGC protocol
pt	Abrir conexao usando o protocolo OpenGC

en-us	Enable/Disable instrument panel

en-us	Specify parking position at an airport (must also specify an airport)
pt	Especifica a posicao de estacionamento de um aeroporto (tambem deve especificar um aeroporto)

en-us	Same as the --parking-id option
pt	Especifica em que posicao inicia em um porta-avioes IA (precisa especificar o porta-avioes)

en-us	Specify pitch angle (Theta)
pt	Especifica o angulo de inclinacao (Theta)

en-us	Initial Position and Orientation
pt	Posicao e Orientacao Iniciais

en-us	After starting the simulator, immediately open the properties dialog with the given property

en-us	Set property <name> to <value>. <type> can be one of string, double, float, long, int, or bool
pt	Define a propriedade e<nome> para <valor>. O <tipo> pode ser uma cadeia de caracteres (string), duplo (double), flutuante (float), longo (long), inteiro (int), booleano (bool).

en-us	Open connection using the interactive property manager
pt	Abrir conexao usando o gerenciador interativo de propriedades

en-us	Specify which proxy server (and port) to use. The username and password are optional and should be MD5 encoded already. This option is only useful when used in conjunction with the real-weather-fetch option.
pt	Especifica qual servidor proxy (e porta) serao utilizados. O nome de usuario e senha sao opcionais e precisam ter codificacao MD5. Esta opcao e util apenas quando utilizada em conjunto com a opcao real-weather-fetch.

en-us	Open connection using the PVE protocol
pt	Abrir conexao usando o protocolo PVE

en-us	Enable/Disable random buildings objects

en-us	Enable/Disable random scenery objects (buildings, etc.)
pt	(edificios, etc.)

en-us	Enable/Disable random vegetation objects

en-us	Set up random wind direction and speed
pt	Especifica uma direcao e velocidade do vento aleatoria

en-us	Open connection using the Ray Woodworth motion chair protocol
pt	Abrir conexao usando o protocolo Ray Woodworth motion chair

en-us	Enable/Disable $FG_HOME read-only

en-us	Enable/Disable METAR based real weather fetching

en-us	Rendering Options
pt	Opcoes de Renderizacao

en-us	Enable/Disable automatic opening of the Launcher when exiting FlightGear

en-us	Enable/Disable resetting all user settings to their defaults (rendering options etc.)
pt	Restaurar todas as configuracoes do usuario para seus padroes (opcoes de renderizacao etc)

en-us	Specify initial climb rate (can be negative)
pt	Especifica a taxa de subida inicial (pode ser negativa)

en-us	Specify roll angle (Phi)
pt	Especifica o angulo de rolagem (Phi)

en-us	Route/Way Point Options
pt	Opcoes de Rota/Way Point

en-us	Open connection using the RUL protocol
pt	Abrir conexao usando o protocolo RUL

en-us	Specify starting runway (must also specify an airport)
pt	Especifica o inicio na pista (e necessario escolher um aeroporto)

en-us	Enable/Disable saving preferences at program exit

en-us	Enable/Disable crash and error reports from being sent to the development team for analysis

en-us	Enable flat shading
pt	Ativa o sombreamento plano

en-us	Enable smooth shading
pt	Ativa o sombreamento suavizado

en-us	Print a list of the currently available aircraft types
pt	Exibe uma lista dos tipos de aeronaves disponiveis atualmente

en-us	Show a list of available audio device
pt	Exibe uma lista de dispositivos de audio disponiveis

en-us	Situation Options
pt	Opcoes de Emergencias

en-us	Enable/Disable sound effects

en-us	Explicitly specify the audio device to use
pt	Especifica expressamente o dispositivo de audio para usar

en-us	Enable/Disable specular reflections on textured objects

en-us	Run the FDM 'n' times faster than real time
pt	Executar o MDV 'n' vezes mais rapido que o tempo real

en-us	Enable/Disable splash screen

en-us	Specify a starting date/time with respect to
pt	Especifica uma data/tempo inicial com respeito a

en-us	Specify the initial state of the aircraft to the given value

en-us	system time

en-us	Enable telnet server on the specified port
pt	Ativa o servidor telnet na porta especificada

en-us	Specify the terrain engine you want to use: tilecache or pagedLOD

en-us	Enable/Disable automatic scenery downloads/updates

en-us	Set target directory for scenery downloads
pt	Especifica o diretorio para download de cenarios

en-us	Enable/Disable texture cache (DDS)

en-us	Specify the DDS texture cache directory to be different than the default location

en-us	Anisotropic Texture Filtering: values should be 1 (default), 2, 4, 8 or 16
pt	Filtragem de textura anisotropica: os valores devem ser 1 (padrao),2,4,8 ou 16

en-us	Synchronize time with local real-world time
pt	Sincronizar hora com a hora local

en-us	Synchronize time with real-world time
pt	Sincronizar hora com a hora do mundo real

en-us	Add this time offset
pt	Adiciona um incremento de tempo

en-us	Time Options
pt	Opcoes de Tempo

en-us	Specify a time of day
pt	Especifica a hora do dia

en-us	Trace the reads for a property;
pt	Traca as leituras de uma propriedade;

en-us	Trace the writes for a property;
pt	Traca as escritas de uma propriedade;

en-us	Enable/Disable trim the model
pt	Compensar o modelo

en-us	(only with --fdm=jsbsim)
pt	(apenas com MDV=jsbsim)

en-us	Specify turbulence from 0.0 (calm) to 1.0 (severe)
pt	Especifica turbulencias desde 0.0 (calmas) ate 1.0 (severas)

en-us	Specify velocity along the body X axis
pt	Especifica a velocidade ao longo do eixo X do corpo

en-us	Remove $FG_HOME directory. For Windows, it additionally removes TerraSync, Aircraft and TextureCache directories from download directory.

en-us	Use feet for distances
pt	Usar pes para distancias

en-us	Use meters for distances
pt	Usar metros para distancias

en-us	Usage: fgfs [ option ... ]
pt	Uso: fgfs [ opcao ... ]

en-us	Use with --terrain-engine=pagedLOD

en-us	Specify velocity along the body Y axis
pt	Especifica a velocidade ao longo do eixo Y do corpo

en-us	Specify velocity along a vertical axis
pt	Especifica a velocidade ao longo de um eixo vertical

en-us	Specify velocity along a West-East axis
pt	Especifica a velocidade ao longo de um eixo Oeste-Este

en-us	Specify velocity along a South-North axis
pt	Especifica a velocidade ao longo de um eixo Sul-Norte

en-us	Specify initial airspeed
pt	Especifica a velocidade inicial do vento

en-us	Same as the --aircraft option
pt	Selecionar um perfil de veiculo definido por um <nome>-set.xml de nivel superior

en-us	Show all command line options when combined with --help or -h
pt	Exibe todas as opcoes da linha de comando quando combinado com --help ou -h

en-us	For a complete list of options use --help --verbose
pt	Para obter uma lista completa de opcoes use --help --verbose

en-us	Enable/Disable display the current FlightGear version
pt	Exibe a versao atual do FlightGear

en-us	Specify the default forward view direction as an offset from straight ahead. Allowable values are LEFT, RIGHT, CENTER, or a specific number in degrees
pt	Especifica a direcao padrao da visao a frente, com um incremento adiante. Os valores validos sao LEFT (esq.), RIGHT (dir.), CENTER (centro), ou um numero especifico em graus

en-us	Specify initial visibility in meters
pt	Especifica a visibilidade inicial

en-us	Specify initial visibility in statute miles
pt	Especifica a visibilidade inicial em milhas

en-us	Specify starting position relative to a VOR
pt	Especifica a posicao inicial relativa a um VOR

en-us	Specify the frequency of the VOR. Use with --vor=ID

en-us	Enable/Disable virtual reality

en-us	Specify velocity along the body Z axis
pt	Especifica a velocidade ao longo do eixo Z do corpo

en-us	Specify wind coming from DIR (degrees) at SPEED (knots)
pt	Especifica o vento vindo da DIRECAO (graus) e VELOCIDADE (nos)

en-us	Enable/Disable wireframe drawing mode

en-us	Specify a waypoint for the GC autopilot;
pt	Especifica o waypoint para o piloto automatico GC;

en-us	binding subsystems
pt	ligando subsistemas

en-us	creating subsystems
pt	criando subsistemas

en-us	downloading scenery

en-us	Error loading 3D model

en-us	Errors occured loading aircraft systems (fuel, electrical, hydrualics)

en-us	Audio FX description contains errors

en-us	Errors loading terrain (BTG)

en-us	The add-on '%VALUE%' contains errors. Please report this to the add-on developers.

en-us	This aircraft (%VALUE%) contains errors. This may include visual issues, or the aircraft might not fly at all. Check for an updated version of the aircraft from its developers.

en-us	The selected aircraft (%VALUE%) contains errors. This may cause visual issues, or the aircraft might not fly at all. Please report the information below to the aircraft hangar's maintainers.

en-us	The custom scenery at '%VALUE%' contains errors. Parts may be missing, or the scenery may not load at all. Check for an updated version of the scenery.

en-us	Errors were found loading the core simulator files (FGData). This usually indicates a problem with the installation, or your local disk.

en-us	The joystick (input device) '%VALUE%' couldn't be loaded correctly. This usually means its configuration file is incorrect.

en-us	Loading a model for another pilot (via multi-player) failed. The other pilot will appear as a default model. (You can disable these errors from the multiplayer settings dialog.)

en-us	Network errors occurred while downloading data. Check your network connection is working correctly.

en-us	Allocating memory failed. Some resources will not be loaded. Adjust your settings to reduce view distance or number of objects loaded.

en-us	The scenario '%VALUE%' contains errors, and may not work correctly.

en-us	Problems occurred loading visual effects (shaders). This can cause objects to be invisible or appear incorrect. It can sometimes be fixed by changing rendering settings inside FlightGear, or occasionally, by updating the drivers for your graphics card.

en-us	The shared models data is missing or incomplete. This means all scenery will be missing some 3D models. To fix this, please enable TerraSync or download the current shared models data from https://www.flightgear.org/scenery/shared-models

en-us	Scenery downloaded via TerraSync is not loading correctly. This usually indicates a problem with your network connection or local disk.

en-us	Problems occurred loading simulated aircraft traffic: some traffic may not appear.

en-us	Errors occurred in an unknown part of FlightGear. Please report this bug to the FlightGear development team.

en-us	Errors loading user-interface

en-us	Errors loading input device configuration

en-us	Texture failed to load

en-us	Shader / Effect problems

en-us	This dialog is work-in-progress. The information shown may not be fully correct, so please check the detailed information (below) and give feedback if something seems wrong.

en-us	Click to show further details.

en-us	An error occurred

en-us	Errors loading scenery

en-us	Errors downloading scenery from TerraSync

en-us	File or resource is invalid or corrupted

en-us	File or resource header is incorrect

en-us	Unable to read/write files correctly (check permissions and disk space)

en-us	The resource contains a configuration problem

en-us	Network connection failure

en-us	The file or resource was not found

en-us	Unable to allocate sufficient memory

en-us	Unknown error

en-us	Scripted loading of XML failed

en-us	Errors loading model XML

en-us	finalizing position
pt	finalizando posicao

en-us	finalizing subsystems
pt	finalizando subsistemas

en-us	initializing
pt	inicializando

en-us	initializing graphics engine
pt	inicializando o motor grafico

en-us	initializing scenery
pt	inicializando cenarios

en-us	initializing subsystems
pt	inicializando subsistemas

en-us	Licensed under the GNU GPL. See https://www.flightgear.org for more information.

en-us	loading aircraft
pt	carregando aeronaves

en-us	loading aircraft list
pt	carregando lista de aeronaves

en-us	loading navigation data
pt	carregando dados de navegacao

en-us	loading scenery
pt	carregando cenarios

en-us	loading fixes

en-us	[VALUE]% complete

en-us	loading airport data

en-us	loading navigation aid data

en-us	loading points of interest

en-us	reading airport data

en-us	extracting [VALUE]

en-us	Saved settings were migrated from a previous version of FlightGear. If you encounter any problems when using the system, try restoring the default settings, before reporting a problem. Saved settings can affect the appearance, performance and features of the simulator.

en-us	Settings migrated

en-us	The shared scenery models are not installed correctly. This will cause missing elements in all scenery. Enable automatic scenery downloading, or download the shared models from https://www.flightgear.org/scenery/shared-models and add them to your scenery list.

en-us	The shared scenery models have not downloaded correctly. This will cause missing elements in all scenery. Automatic scenery downloading is enabled, check your network connection is working as expected.

en-us	Missing shared models

en-us	KB

en-us	KB/s

en-us	MB

en-us	MB/s

en-us	Unstable nightly build - some features may be under active development

en-us	Drag while holding the right mouse button to look around

en-us	Hold Ctrl while looking around to move the view up, down, left or right

en-us	Press a/A to adjust the simulation speed

en-us	Press x/X to zoom in and out

en-us	Find frequencies of nearby ATC services from the Radios dialog

en-us	Press v to change your viewpoint, Ctrl-V to return to the cockpit

en-us	Press F3 to take a screenshot

en-us	Join the FlightGear community at https://forum.flightgear.org

en-us	Press h to bring up a Heads Up Display

en-us	Show or hide the menu bar by pressing F10

en-us	Frame-rate too low? - try disabling AI traffic

en-us	Select Environment → Weather to fly in different weather

en-us	Press F12 to change the radio frequencies easily

en-us	Look around by holding down the right mouse button and moving the mouse

en-us	Select Multiplayer → Multiplayer Settings to join the shared flight environment

en-us	Can't get the engine started? - see Help → Aircraft Checklists

en-us	Drag while holding the middle and right mouse buttons to move the viewpoint

en-us	Press / to explore the internals of the simulator

en-us	Press Tab to move the viewpoint with your mouse and use the scroll wheel to zoom

en-us	Love FlightGear? Donate to keep our infrastructure running at https://flightgear.org/donate

en-us	The border of a high pressure region, in which the airmass becomes unstable and various convective and stratiform clouds may appear.

en-us	Border of a high pressure region

en-us	The border of a low pressure region, in which the airmass is unstable and convective clouds start to form layers and merge into stratiform clouds.

en-us	Border of a low pressure region

en-us	If you just got your IFR rating, this is what you are allowed to do. But can you?

en-us	CAT I minimum

en-us	This is expert level. You will barely see the taxiway from the cockpit, even if you are on ground. Fog and light drizzle, freezing level at 1000ft.

en-us	CAT IIIb minimum

en-us	With just a 1/4 mile visibility and clouds at 100ft, you don't see much of the runway until seconds before touchdown. Trust your instruments to stay alive.

en-us	CAT II minimum

en-us	The center of a high pressure region, characterized by descending air and hence only weak cloud development with high visibility.

en-us	Core high pressure region

en-us	The core of a low pressure region, characterized by overcast clouds, bad visibility on the ground and significant rainfall.

en-us	Core low pressure region

en-us	Fog developed this autumn's morning. Expect good visibility above the layer. However - getting through it can be a challenge. Stay alive for a 500' climb and you'll see the sun!

en-us	Early morning fog

en-us	A lovely day for trip to your favorite 100$ hamburger airfield

en-us	Fair weather

en-us	A high pressure region, characterized by moderate to strong Cumulus development in the afternoon and fairly good visibility conditions.

en-us	High pressure region

en-us	A standard atmosphere model for testing and calibrating aircraft performance and design.

en-us	International Standard Atmosphere

en-us	Fetch live weather data for your nearest airport from noaa.gov. You need a working internet connection. Weather is generated automatically, once a valid METAR is received.

en-us	Live data

en-us	A low pressure region, characterized by rising air, widespread formation of stratiform clouds and beginning rain.

en-us	Low pressure region

en-us	Enter your favorite METAR weather. A valid METAR syntax is required.

en-us	Manual input

en-us	After the storm - limited visibility and some showers. Go or No-Go?

en-us	Marginal VFR

en-us	You're out for an adventure? Gusty winds blowing from the west and isolated thunderstorms should be avoided. Fasten your seatbelt!

en-us	Stormy Monday

en-us	A hot and damp summer day with thunderstorms developing in the afternoon. Be prepared for reduction of visibility in showers and strong gusts near thunderstorms

en-us	Thunderstorm

en-us	A warm sector, characterized by high moisture in the air and haze extending up to high altitudes, but otherwise largely convective cloud development.

en-us	Warm sector